It is ideal for use prior to emissions inspections, and it helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits, P.i. provides up to 5.7 percent improved fuel mileage after only one tank of gasoline. A single treatment of P.i. also delivers reduced emissions, restored power and performance, reduced need for higher octane fuel, reduced carbon rap and preignition, better drivability and smoother operation.

It is ideal for use prior to emissions inspections, and it helps maintain peak engine efficiency, fuel economy, power and drivability in newer low mileage engines. In engines with accumulated deposits. P.i. provides improved fuel mileage up to 5.7%, reduced emissions, restored power and performance, reduced need for higher octane fuel, reduced carbon rap and preignition, better drivability and smoother operation after only one tank of gasoline. Treat one full tank of gas every 4,000 miles or 100 hours of service.

It will attack 2 cycle motors also. A fuel system with gas-oil mix relies on the oil for lubrication. Ethanol molecules attach themselves to metal components and prevent the oil in the mix from lubricating internal engine components causing oxidation or rust. AMSOIL Gasoline Stabilizer will reduce the oxidation process that occurs when fuel is stored for extended periods to help prevent the possible resulting internal formation of varnish and sludge. The resulting sludge could clog rejectors, stick floats and cause poor engine performance.

Thanks to Eastwood for information on fuel.

Once the water is released into the system, corrosion begins; performance drops and impurities begin to coagulate into sludge. This attacks everything that has gasoline in it. Be sure to replace your fuel within 30 days or go with AMSOIL Gasoline Stabilizer “great stuff” 1 oz to 2.5 gallons and then you don’t have to worry about Ethanol. Use it year round, or replace your fuel before 30 days.

So that raises the question, how do companies create a higher octane rating? The answer is that they mix various alcohol fuels and utilize fuel additives. Some fuels, such as methanol or ethanol, have an octane rating above 100 and can raise the overall rating. Fuel additives do the same, increasing the gas’s octane rating and providing lubrication.

Other benefits of using this new Fuel additive would be that it would help your engine reach higher levels of efficiency, 2.3%-5.7% better gas mileage at plus more power in vehicles that are newer. With Cars that have deposits before using this fuel additive showed after using the Amsoil P.I. that the tank was cleaner after just one tank of gas.

You would want to do research on which gasoline additives have done the best. I would research which company’s make the best product for the best price. No use spending a ton of money on a additives if its costing you a arm and a leg. Also be careful to make sure that its not harmful to your car or the environment.

Just because summer is coming to an end doesn’t mean there’s any excuse to sacrifice boat maintenance. As you prepare to winterize your small vessel, you might be concerned about the health of the fuel system. When an engine sits dormant for an extended period of time, water vapor can build up and wreak havoc on the fuel tank and lines. After you’ve emptied the outboard motor of most of its fuel, add a healthy dose of gasoline stabilizer.

These invaluable gasoline additives keep the system well lubricated so that rust and corrosion don’t build up on the bare metal parts in the fuel system. And of course they keep excess water at bay, preventing varnish and sludge from depositing inside the injectors, carburetors and other vital parts of the engine. Before you stow your boat away for the season, make sure all your bases are covered.